Sliding window selection tips - Cleaning method of sliding windows Sliding window selection tips (1) When purchasing, be sure to pay attention to its safety. Common sliding doors are all aluminum alloys, so you must carefully select the quality of t...
Sliding window selection tips - Cleaning method of sliding windows
Sliding window selection tips
(1) When purchasing, be sure to pay attention to its safety. Common sliding doors are all aluminum alloys, so you must carefully select the quality of the frame profile. It is best to let the merchant show you the section of the profile and choose aluminum alloys with a wall thickness of more than 1mm. Most aluminum-magnesium alloy profiles use primary colors without coating. In order to make inferior products, some merchants often use the surface coloring of recycled aluminum profiles. Therefore, when purchasing, consumers should let the merchant display the sections of the product profiles to understand the real material. Stores generally have finished sliding doors displays. Hold the frame edge of the sliding door and shake it to observe whether it is deformed severely. If there is severe deformation, it is likely to fall out of the sliding door track frame in the future, which is very dangerous.
(2) The sliding door is divided into two groups of pulleys, and the upper pulley plays a guiding role. Because it is installed in the upper track, consumers often do not pay attention to it when purchasing. A good upper pulley structure is relatively complex. Not only does it have bearings inside, but also an aluminum block fixes the two wheels, making it slide smoothly in a direction and with almost no noise. When choosing, consumers should not mistakenly think that the sliding door slides the lighter the better when it slides. In fact, high-quality sliding doors should have a certain weight when sliding, smooth without vibration.
(3) It is best to choose a track with positioning function so that the sliding door can be fixed when it is closed, otherwise there will always be a gap between the frame edges on both sides when many sliding doors are closed. When the track is on the ground, try to choose a flat-shaped surface. The grooved ground rail used in the past will easily hide dirt after being used for a long time, and it will easily cause stuttering. Sometimes it will be deformed and affect the use of sliding doors.
Cleaning and Maintenance of sliding windows
1. Heavy objects cannot be hung on the sash of sliding windows.
2. The trademarks and films on the surface are washed with warm water and weak detergents, and the binder ingredients are scrubbed with alcohol or organic solvents (ether, benzene).
3. When using the sliding window, the sliding track should be cleaned frequently to keep it clean so that there is no hard particle substance on the surface and grooves.
4. Plastic steel doors and windows are equipped with drainage systems in window frames, window sashes and other parts to ensure the air-tightness and watertightness of doors and windows. Users should not block the drainage holes of doors and windows during use, so as not to cause the drainage performance of doors and windows to deteriorate.
5. The surface is contaminated with a soft cloth and wipe it clean with a neutral detergent or ammonia solution or special detergent.
6. When using the shield fan of the sliding window, please pay attention to coincide with the vertical frame of the inner rail push-pull fan to maintain good sealing.
7. The force point of the sliding window should be in the middle or lower position when pushing and pulling. Do not use too much force when pushing and pulling, so as not to reduce the service life of the sliding window.
8. When a product fails, please promptly notify professional maintenance personnel for repair; non-professional personnel shall not open it without authorization, otherwise it will be deemed to have voluntarily waived the warranty right.
